Friday, June 28, 2013

How to configure NTC GPRS in iPhone

Are you looking for NTC GPRS setting that will work for iPhone? Search no more, here is the 
stepwise guide to configure NTC GPRS setting for iPhone.

FOR older iOS Versions
Step 1: Go to Settings      
Step 2: Go to General
Step 3: Go to Cellular
Step 4: Go to Cellular Data Network setting
Step 5: Enable the APN settings
Step 6: On APN type "ntnet" without quotes.
Step 7: Leave username and password field blank.
Step 8: Restart your iPhone and you are done. Enjoy the NTC GPRS/3G network on your iPhone.


FOR iOS8
  1. From the main menu, tap Settings > Cellular.
  2. Check that Cellular Data is turned on.
  3. Tap Cellular Data Network. 
    Important: If this setting does not appear on the device, the device is not unlocked.
  4. Enter the following information under the Cellular Data section:
    • APN: ntnet
    • Username: <Leave Blank>
    • Password: <Leave Blank>

If both of above doesn't work
Go to :  Settings > Cellular > Cellular Data Network.
To edit the settings, tap each field and enter the details provided above. You should edit APN. Leave username and password field blank. In APN field use ntnet. The settings should save automatically.

16 comments:

  1. AnonymousAugust 13, 2013 at 8:53 PM

    Could you please post 3G settings for android??

    ReplyDelete
    Replies
    1. SumbhaAugust 14, 2013 at 12:20 AM

      Please follow this blog. I will be creating a post on configuring GPRS for Android.

      Delete
  2. UnknownMay 28, 2014 at 9:32 AM

    This is not working for iphone 4s .
    Could u please help !

    ReplyDelete
    Replies
    1. SumbhaMay 29, 2014 at 3:47 AM

      Can you state what exactly happened? Which step you were unable to follow?

      Delete
    2. AnonymousJuly 2, 2014 at 8:48 AM

      I followed the same procedure as given above but my 3g is not working i am from chitwan

      Delete
  3. UnknownJune 6, 2014 at 8:12 AM

    I did every thing as written above but i am still unable to use 3g in my phone. Can u tell me some other alternatives???

    ReplyDelete
  4. UnknownJuly 17, 2014 at 3:51 AM

    i have bought a new iphone at newroad, my iphone can't use cellular without turn on data roaming on, if the data roaming turn on, the charge cost very high, could you help me

    ReplyDelete
  5. buddha bhagwanFebruary 24, 2015 at 12:35 AM

    i cant configure the gprs setting on my iphone but 3g signal is shown while cellelur data is on so could you help me/

    ReplyDelete
  6. EthaneMarch 9, 2015 at 4:44 AM

    Nothing happens in my iphone5

    ReplyDelete
  7. UnknownApril 17, 2015 at 12:25 AM

    Hello,

    I m from Janakpur, i m using Blackberry 10 with NTC postpaid, till few days ago i m usuing GPRS on my cellphone, but from saomedays my cellphone doesn't use internet services, i don't know what is wrong with this, i want use 3g/2g on my cellphone frequently, so please suggest me how do this? and also let me know is there 3g service available in Janakpur.

    Thanks

    ReplyDelete
  8. Kalyan ShresthaAugust 16, 2015 at 7:27 PM

    Followed the same procedure as given above but my 3g is not working. my iphone model is 4S from Japan soft bank. Using Chips instead of unlock. ios is 9 public beta.

    ReplyDelete
    Replies
    1. SumbhaAugust 17, 2015 at 8:20 AM

      I am not sure but chip unlock technique is difficult to configure. You might have to jailbreak to change APN. Not sure though.

      Delete
  9. UnknownSeptember 19, 2015 at 7:03 AM

    iPhone 6 plus not working with above instructions. could you clarify?

    ReplyDelete
    Replies
    1. SumbhaSeptember 19, 2015 at 7:15 AM

      Please refer to above post. I have updated the post with new details.

      Delete

Subscribe to: Post Comments (Atom)